Home   About Us   Contact Us   Site map
	Solenoid Valves Pressure Relief Valves Filter Drier Shells Discharge Mufflers Liquid Line Strainers   Our other Solenoid Valves... Capacity Control Solenoid Valves   Cap. Control SV Type BSV-1   Cap. Control SV Type APS-1   Cap. Control SV Type SVRF -3W   Unloader Power Element 2-Way Normally Closed Solenoid Valves Sanlan Solenoid Coil Models INTRODUCTION ‘SANLAN' Pilot Solenoid Valve Type T-180 is a special type of 3-way solenoid valve used in place of large capacity solenoid valves for positive closing of liquid lines. T-180 is available for refrigerants 12,22,134a and 502 as a supplementary device to thermostatic expansion valves. The Pilot Solenoid Valve Type T-180 does not directly close the liquid line, but acts on the thermostatic expansion valve, causing the expansion valve to close tightly or operate normally, depending on whether the solenoid valve is energized or de-energized. TECHNICAL INFORMATION The valve has three ports, with ¼” SAE external threading connections. These are IN, VALVE and SUCTION respectively which are marked accordingly. IN – This is high-pressure liquid line Inlet port. This is normally open port. VALVE – Valve port is the middle and common port. External equalizer of the thermostatic expansion valve is connected to this port. SUCTION – Suction port , which should be connected to the suction line of the compressor, is at the bottom of the valve. This is normally closed port. SPECIFICATIONS Standard Coil Ratings: - 15W molded coil type TKC-2 with cable connection. TKC-2 coil can be supplied with a wide choice for a.c. or d.c. Maximum Opening Pressure Differential MOPD: - 21 bar/300psig. Safe Working Pressure SWP: - 35bar/500psig. Connections: - ¼”SAE Flare External Net Weight: - 650gm. Principles of Operation Download PDF
	© Sanlan Controls